Drivers AVM USB Devices

/ Comments off

This document is also available for the following products:

With the FRITZ!Box USB remote connection software, you can use a USB storage device connected to the FRITZ!Box as if it were connected directly to the USB port on your computer.

Important:If you want to allow more than one computer and other devices to access the USB storage device, configure the USB storage device as a central storage location in the home network ('storage (NAS))'

Now Setup can install driver for Composite USB device; use checkbox 'Process Parent'. Note, there is overclocked all functional devices from composite device, not the mouse only. For this feature functioning recompiled old drivers for Win 98&ME, 2000. I was surprised to learn that some people use driver to change rate of Full speed USB mice. AP-X or BlueFRITZ! AP-ISDN) using the Common ISDN Access Profile (CIP), or with other Bluetooth devices, can be downloaded here. NOTE: In order to take advantage of all features of the current driver software, you must also update the firmware of your AVM. Windows device driver information for AVM FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN combines an ADSL router and a PBX. It allows the users to make economical phone calls over the Internet with VoIP, or over the ISDN or analog phone line. It is also possible to me Internet telephony with existing phones, without turning on the PC.

Drivers AVM USB Devices

Requirements / Restrictions

Drivers avm usb devices windows 10
  • Windows 10 / 8 / 7 (64-bit or 32-bit) is installed on the computer.
  • Only one computer can access the USB storage device at a time.
  • The FRITZ!Box Media Server is not available when the FRITZ!Box USB remote connection is active; you cannot access the storage with the FRITZ!NAS user interface or MyFRITZ!.
Usb

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Connecting a USB storage device to the FRITZ!Box

  1. Connect the USB storage device to a USB port on the FRITZ!Box.

    Note:The FRITZ!Box supplies USB devices with a total of up to 500 mA in accordance with the USB 2.0 specification. If more power is needed, connect your USB devices to the FRITZ!Box via a USB hub with its own power supply (active USB hub).

2 Installing the FRITZ!Box USB remote connection software

Install the FRITZ!Box USB remote connection software on the computer that you want to use the USB device connected to the FRITZ!Box with:

Drivers Avm Usb Devices Windows 7

  1. Log on to the computer as the Windows user who wants to use the FRITZ!Box USB remote connection.

    Important:If the user does not have administrator rights, you must enter a valid administrator password when installing or starting the software for the first time.

  2. Open the FRITZ!Box user interface.
  3. Click 'USB Devices' in the 'Home Network' menu.
  4. Click on the 'USB Remote Connection' tab. If the tab is not displayed, enable the Advanced View first.
  5. Enable the option 'USB remote connection enabled'.
  6. Click the 'USB remote connection software' link.
    • The window 'USB Remote Connection' opens.
  7. If the window 'USB Remote Connection' has a 'Download' button:
    1. Click 'Download' in the window 'USB Remote Connection' and download the file 'fritzbox-usb-fernanschluss.application'.
    2. Double-click the downloaded file.
  8. Click 'Install' and follow the instructions on your screen.
  9. Repeat steps 1 - 8 for all other Windows users who want to use the FRITZ!Box USB remote connection.

Drivers AVM USB Devices

3 Enabling the USB remote connection for storage

  1. Click 'Home Network' in the FRITZ!Box user interface.
  2. Click 'USB Devices' in the 'Home Network' menu.
  3. Click on the 'USB Remote Connection' tab. If the tab is not displayed, enable the Advanced View first.
  4. Enable the USB remote connection and the option 'USB storage media'.

    Important:If the USB remote connection is used for the device type 'USB storage media', the USB storage device cannot be integrated in the NAS (Network Attached Storage) of the FRITZ!Box.

  5. Click 'Apply' to save the settings.
AVM

4 Connecting a USB storage device to a computer via the USB remote connection

  1. Double-click the FRITZ!Box USB remote connection symbol in the notification area of the Windows taskbar (Systray).
  2. If password protection is enabled for the FRITZ!Box user interface, enter the password and leave the 'User name' field blank.
    • If you have protected the FRITZ!Box with a user name and password, enter the name and password of a user who is authorized to access the FRITZ!Box user interface.

      Note:You can edit the access rights of users under 'System > FRITZ!Box Users' in the FRITZ!Box user interface.

  3. Click 'Refresh'.
  4. Right-click the USB storage device that you want to connect to the computer.
  5. Click 'Connect'.

Now the computer recognizes the USB storage device as a USB device and it can be used as if it were connected directly to a USB port on the computer.

Note:Before a different computer can access the USB storage device, you must clear the connection between the computer and the USB storage device in the USB remote connection software.

Category: Network and Modem
Manufacturer: AVM
Caution Level: Intermediate
Download File Size: 2.71 Mb
Operating System: Windows XP
Latest Version / Release Date: 05.04.15 / 2008

Windows device driver information for FRITZ! WLAN USB Stick N

The Fritz!WLAN USB stick N driver is designed for use during the installation of the corresponding device. The device is used to establish wireless connections to PCs and notebooks using the USB stick. The wireless network connections are established in accordance with the 802.11n standards, which transfers data at 300 megabytes per second rates. The device is further downward compatible among the 802.11g and 802.11a standards. In addition, the device has a dual band support, which enables connections of between 2.4 Gigahertz and five gigahertz. With this device, the user is able to secure wireless connections, which are compatible to WEP, WPA and WPA2 encryption. The device is also compatible with 2.0 USB hi-speed standards, and can work with the 1.1 USB standards although at slower data transfer rates. This device does not usually need the driver package when installed on windows XP service pack 2 or Windows vista-32 bit.

Outdated Drivers?

Usb

Drivers Avm Usb Devices Windows 10

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

When using the Fritz!WLAN USB stick N, one only needs to connect the stick to the host computer and the information needed to secure one's network is automatically transferred to the device. By simply sticking the stick to the host computer's USB port, the wireless LAN is securely encrypted and the user needs not adjust the security settings. The manufacturer package that usually comes with this device has software that enables the device access third-party wireless LAN points. The device is also enabled with flexible transmitter settings that ha control over the power consumed by the device when operating on a wireless range. Overall, the Fritz WLAN USB stick N is easy to install since the encryption is automatically configured on installation therefore requiring no input from the user. The user also needs not use a generic password since each device in the wireless network is automatically equipped with unique keys, which makes the Wireless LAN secure. It is highly recommended you run a free registry scan for Windows and FRITZ! WLAN USB Stick N errors before installing any driver updates.